This MATEC 30 HV (2003) Universal Machining Centre was manufactured in 2003 in Germany. It is controlled by a BOSCH TYPE 3 OSA Control unit. This CNC traveling column milling machine (3+2 axes) is equipped with a main spindle type DMS 112 with speed range up to max. 12,000 min / -1 and drive power 30 kW. It has a NC swivel head (Sauter) with swiveling + / - 90 ° and graduation + / - 3 arc seconds. In addition it runs with a tool changer with 48 positions and a HSK A63 tool holder. The table is a NC rotary table with a clamping surface of 3,500 x 835 mm and 7 T-slots. IKZ 70 bar, paper belt filter and chip conveyor (ejection height 1200mm) and 3D radio measuring probe come with the machine. The machine is prepared with a 4th axis interface. The condition of the machine is very good - it is still in production and maintenance service has been applied regularly according to manufacturer's standards. An on-site inspection is possible at any time.
General Data
Measurements width: 7000 mm
Measurements depth: 6000 mm
Measurements height: 4000 mm
Machine weight: 15000 kg
Control Unit
Brand: BOSCH
Model: TYPE 3 OSA
Main drive
Spindle speed range: 12,000 min / -1
Spindle motor power: 30 kW
Number of axis: 3+2
Movement
X-AXIS Movement: 3000 mm
X-AXIS Rapid traverse: 30 m / min
Y-AXIS Movement: 800 mm
Y-AXIS Rapid traverse: 30 m / min
Z-AXIS Movement: 1100 mm
Z-AXIS Rapid traverse: 30 m / min
Tools
Type of tool holder: HSK 63 A
Media
Chip conveyor: Yes
Internal cooling: Yes
Additional equipment
: Coolant system: Internal coolant supply 70 bar / / Cooling unit for switch cabinet
: Paper belt filter Flushing gun
: Chip conveyor: Ejection height 1200mm
: 3D radio measuring probe
: Direct measuring systems x-y-z
Machine Benefits
Technical Machine Benefits:
- Main spindle: type dms 112 / / max. Torque 190 nm / / drilling capacity steel approx. 60 mm / / milling capacity approx. 500 cm³ / / thread cutting m30
- Feed rates: rapid traverse (x / y / z) 30 m / min / / feed speed 30,000 mm / min
- Nc swivel head: sauter swiveling + / - 90 ° / / pitch + / - 3 arc seconds
- Work table: table clamping surface 3,500 x 835 mm / / t-slots 7x / / t-slots - width 18-h7 / / nc rotary table sempuco skh 4 / 630 / / horizontal faceplate / / faceplate diameter 630mm / / embedded in the machine table
- Tool changer: number of tool positions 48 pos.
- Total connected load: 60kva
- Fully enclosed work area
- Loading doors suitable for crane loading / / automatic opening / / movable partition wall
- Clamping hydraulics interface 4th axis / / nc rotary table rw / nc 160 / 250 (hofmann)
- Face plate diameter 250mm / / center height 160mm / / hydraulic tailstock with quill mk4
Qualitative Machine Benefits:
- Machine still under production and can be inspected at any time
- The machine has been serviced every year by the service department and is technically in good condition |